HIGH PERFORMANCE FORMER
HIGH PERFORMANCE FORMER
FEATURE
The bolt former has is high performance, precision and stability. Max out put 400pcs/min. in same space and double production capability.
OPTIMIZED CUT-OFF KNIFE
Optimized cut-off knife as square shap, the material of cut-off knife is special aluminum alloy which will avoid the sway problem for cutting operation.
HEAVY SLIDER
The main slider equips with the heavy slider to stabilize the bolt former to avoid the vibration issue under the high speed operation.
LIGHTWEIGHT TRANSFER
The material of lightweight transfer is aluminum alloy which is low density and high strength. We also use wear resistant steel for main slider to reduce wear issue.
OIL FILTER
Installing high efficiency centrifugal filter to keep clean inside the bolt former. The filter brand is MANN+HUMMEL from Britain.
MACHINE INDIDE
The feeding system is one-way bearing to avoid the material returning.
CLUTCH
The clutch is Japanese brand. The feature is lower air current request, but producing high torsion, therefore, the clutch could bear higher transmission power.
The human machine interface was developed by CCM 's R&D team, it could be flexible adjustment depend on customer's request.
Human Machine Interface
Wire Feeding, Stopper, K.O.
Operated by Graphical Panel
Wire Feeding, Stopper, K.O.
Operated by Graphical Panel
Wire Feeding, Stopper, K.O.
Operated by Graphical Panel
Operation Panel
Abnormity Removing
Error Log
Abnormity Indication
CHS SERIES 3&4 STATION FORMER
| MODEL | CHS-10B | CHS-13B | CHS-17B | CHS-19B | CHS-24B | CHS-30B | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECIFICATION | ||||||||||||||
| FORGING STATION | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | 3 | 4 | ||
| PRODUCTS | SIZE | 1/4 (M6) | 5/16(M8) | 3/8(M10) | 1/2(M12) | 5/8(M16) | 3/4(M20) | |||||||
| MAX.L(mm) | 50 | 70 | 100 | 125 | 150 | 200 | ||||||||
| MIN.L (mm) | 12 | 16 | 16 | 20 | 25 | 40 | ||||||||
| CUT-OFF DIA MAX(mm) | 8 | 10 | 12 | 15 | 18 | 23 | ||||||||
| CUT-OFF LENGTH MAX(mm) | 70 | 95 | 125 | 165 | 190 | 260 | ||||||||
| KICK-OUT LENGTH MAX(mm) | 60 | 80 | 110 | 145 | 175 | 235 | ||||||||
| P.K.O LENGTH MAX (mm) | 14 | 20 | 25 | 25 | 30 | 35 | ||||||||
| CUT-OFF QUILL (D X L) (mm) | 28×46 | 35×56 | 40×60 | 46×80 | 60×100 | 75×120 | ||||||||
| MAIN DIE HOLE (D X L) (mm) | 50×65 | 70×115 | 80×135 | 95×165 | 100×195 | 135×260 | ||||||||
| DIES PITCH (mm) | 60 | 87 | 93 | 114 | 126 | 150 | ||||||||
| PUNCH HOLE (D X L) (mm) | 40×77 | 50×118 | 50×111 | 60×120 | 75×165 | 90×197 | ||||||||
| RAM STROKE (mm) | 120 | 140 | 160 | 240 | 280 | 360 | ||||||||
| FORGING POWER (ton) | 20 | 30 | 40 | 50 | 55 | 75 | 80 | 100 | 140 | 170 | 200 | 220 | ||
| MAX. OUTPUT (pcs/minute) | 400 | 350 | 280 | 250 | 165 | 120 | ||||||||
| MAIN MOTOR (hp) | 20 | 25 | 30 | 30 | 40 | 50 | 60 | 75 | 100 | 100 | 125 | 125 | ||
| MODEL | Productitive (pcs/min) |
|---|---|
| STANDARD FORMER | 200~250 (PCS /MIN) |
| HIGH PERFORMANCE FORMER | 350~400 (PCS /MIN) |
